Description

Original Autohex II BMW Lite Locksmith with HW4

Autohex II HW4 and the essential features needed to program BMW keys for E and F series, solving all cases including all keys lost

Using this kit you can do asfollowing:

● Read old ISN in BMW E series for following Ecus:D62M57A0,  D62M57B0,  D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6,  
N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE,  N62_TUE2.

● Read Long ISN (SK) in BMW E series from following Ecus:  MSV80,  MSD80,  MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2,  
MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0,  
D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0

● Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0,  S63TU_L0,  S63TU_R0
● Read long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
● CAS1, CAS2, CAS3 and CAS3+ read only ISN and SK
● Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
● Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
● Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
● Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM
● ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
● Read ISN of MSD85, MSD87, MSV90 in F series.
● ECU Cloning/Tuning for a wide range of brands. This function is free for 90 days  (Check Supported ECU List).
● Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
● Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool.
● Modify KOMBI Mileage by HexTag tool.
● Renew all BMW keys, and many other brands by HexTag tool.

Notice:
1. HexTag ECU Cloning Function is free for 90 days only.
After 90 Days, ECU Cloning License will cost $1000, and $350 for annual update fee.
2. We offer one year warranty, while return for refund is not acceptable.

What you miss in this Kit:
BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)
Modify ISN/SK in DME, DDE and CAS by OBD (can be ordered later)
Reset EGS 6HP/8HP EWS (can be ordered later)
Ecu Coding, and Vehicle Order managing (can be ordered later)
ISN Reading from Tricore Ecus by boot mode. (can be ordered later)

Package List:

Autohex II Hardware WVCI HW4
The Powerful HexTag BDM and Key programmer.
BMW Software Lite Locksmith License
Key Programming License
BMW ISTA/D Driver to Run Dealer Software
1 Year Technical Support
1 Year Hardware Warranty

Contact Information:
Whatsapp: +86 183 4923 2556 - +8619881513864
Live Support: Chat with us online
Email: sales@itcdiag.com - info@itcdiag.com
Skype : Sales ITCDiag - info@itcdiag.com

Reviews (0)

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating     Bad           Good

Continue